English
Français
Deutsch
Italiano
Русский
Español
Português
Nederlandse
Ελληνικά
日本語
العربية
हिन्दी
Türkçe
Indonesia
Tiếng Việt
ไทย
বাংলা
فارسی
Polski
-
The stainless steel body ceramic faceboard foil box used for the dewatering The foil box consists of face board and frame, and is divided into single-page, double-page and multi-page foil boxes. 1. face board: Long strip board with rake angle, horizontal support surface and backward inclination ...
-
The low vacuum / high vacuum suction box used in the paper forming part After the slurry is formed on the net and preliminary dewatering, its dryness and tightness gradually increase, and the resistance to dehydration increases. To continue dewatering on the net, a method of high pressure difference ...
-
The stainless steel metal hose matched with the rotary joint for the dryer QS-GF type rotary joint (65-100) Scope of application: Maximum speed: ≤100RPM Maximum temperature: ≤220 ℃ Maximum pressure: ≤1.8MPa Applicable medium: saturated steam, superheated steam, superheated water
-
The high quality pneumatic adjustor for the paper machine wire and felt Type:pneumatic Swing angle: ±5° Main structure: pneumatic tire, swing bearing seat, machine base, moving guide rail, transmission side bearing Auxiliary configuration: signal generating device, control box Material: Signal ...
-
Customized Paper Machine Parts cast iron felt /wire Pneumatic Corrector with rubber made air spring Including a base, a movable seat, a corrugated pneumatic tire, a guide rail bearing seat and an adjusting device, the guide rail bearing seat is slidably arranged on the movable seat, and the ...
-
stainless steel plate cylinder mold for the wet paper forming The cylinder mold is the main component of the web forming in the cylinder paper machine. stainless steel plates cylinder mold Cast iron spokes, thickness 40mm, spoke pitch 180mm, stainless steel rods, and stainless steel belt width 1.5mm...
-
Stainless Steel Dump Sorter Screening Plate For Waste Pulp Light Impurities 1. Introduction Features: This machine is mainly used for the treatment of tailings in the screening section of the waste paper system. The incoming pulp concentration is about 1-3%, and the slag concentration can reach 20%. ...
-
The Whole Stainless Steel Reject Sortor Machine For Second Stage Of Coarse Pulp Cleaning In The Stock Preparation 1. Introduction Features: This machine is mainly used for the treatment of tailings in the screening section of the waste paper system. The incoming pulp concentration is about 1-3%, and ...
You Might Be Interested In
