English
Français
Deutsch
Italiano
Русский
Español
Português
Nederlandse
Ελληνικά
日本語
العربية
हिन्दी
Türkçe
Indonesia
Tiếng Việt
ไทย
বাংলা
فارسی
Polski
-
The double convolution rubber air spring used in the wire and felt corrector Operating pressure 0 - 8 bar Choice of steel, stainless steel or aluminium connection mounting plates Operating temperature range -40ºC to +50ºC up to 70°C intermittent use High temperature ECO rubber version up to +130°C ...
-
The stainless steel roll wheel used in the felt and wire sensor Wire &felt rectifier also called rectifier, felt deviation controller, pneumatic automatic deviation corrector; Wire &felt deviation corrector; paper machine net blanket corrector; paper machine deviation corrector. It is a device that ...
-
The paper rope in different size used in the high speed paper making machine Aramid flame retardant rope is woven from aramid fiber filament. It is a kind of functional fire-resistant high-temperature rope that is flame-resistant and high-temperature resistant, wear-resistant and resistant to ...
-
The customized felt sensor tin bronze / stainless steel valve body Wire &felt rectifier also called rectifier, felt deviation controller, pneumatic automatic deviation corrector; Wire &felt deviation corrector; paper machine net blanket corrector; paper machine deviation corrector. It is a device ...
-
High molecular polyethylene(HDPE)faceboard made for the vacuum suction box / forming board After the slurry is formed on the net and preliminary dewatering, its dryness and tightness gradually increase, and the resistance to dehydration increases. To continue dewatering on the net, a method of high ...
-
2. Stainless steel dump rejector in the paper pulp cleaning system The rejects separator is an ideal equipment for tailings treatment in waste paper pulping system. Adopting closed operation, no splash of pulp water, good treatment effect, reducing fiber loss, and low slag disposal cost. It is a ...
-
Vertical wood pulp board breaking and pulping machine for the printing paper / tissue paper This equipment is a vertical structure, which is mainly composed of a trough, a rotor, a transmission part, a pulp tray, a bracket and other parts. The rotor device is composed of a rotor and a bearing ...
-
5. Stianless steel impeller blade for the high consistency hydrapulper The impeller blade is an important filtering component on the pulper, and is generally made of cast stainless steel. 1. Good abrasion resistance and long service life, more than ten times that of metal screens, 3-5 times that of ...
You Might Be Interested In
